MV2400-R ADVANCE PLUS

MV2400-R ADVANCE PLUS

The new innovative MV series features improvements in machine construction, auto-threading, internal machine communication, power supply technology and operating costs. For easier user interface, the MV2400-R Advance Plus utilizes the new M700 series control with a 15-inch touchscreen. It also showcases Mitsubishi's continuous dedication to high precision through new innovations—including a new non-contact Cylindrical Drive System. The technology available with the MV2400-R represents significant advancements in wire EDM technology.

 

  • Specifications
Machine Tavels: X x Y x Z in (mm) 23.6 x 15.7 x 12.2 (600 x 400 x 310)
Maximum Workpiece Dimensions: W x D x H in (mm) 41.3 x 32.3 x 12.0 (1050 x 820 x 305)
Max. Submerged Workpiece Weight: lb (kg) 3307 (1500)
Table Dimensions: in (mm) 33.0 x 25.2 (840 x 640)
U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm) 15 deg.@ 10.2 (15 deg.@ 260)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4" 60mm (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min) 51.2 (1300)
Power Supply V350-V
Minimum Drive Unit / Resolution 0.000002 / 2 µin ( 0.00005 / 50nm)
User Program Storage [Hard Disk Size] 1 GB [20 GB]
Wire Diameter Possible: in (mm) 0.004~0.012 (0.1~0.3)
Minimum Start Hole Diameter: in (mm) 0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg) 22 [44] (10 [20])
Filters / Type 2 / Paper
Filter Tank Capacity: gal (L) 227 (860)
Machine System Dimensions: in (mm) 105.8 x 119.3 (2687 x 3030)
Machine Installed Height: in (mm) 84.6 (2150)
Machine System Weight: lb (kg) 7716 (3500)
Fluid System Weight: lb (kg) 711 (350)
Power Requirements [KVA] 200-230V [13.5] Built in AVR
Compressed Air Requirements 2.7 cu.ft./min. @ 71~100 psi

 

OVERVIEW

  • New M700 Series Control
  • 15" touch screen
  • Non-contact Cylindrical Drive Technology

 

FEATURES

  • V350-V AEII Power Supply DMX-S (Digital Matrix Sensor)
  • Shapes each spark reducing electrode wear
  • World's first Linear Shaft Drive System XYUV (no ball screws) 
  • All Fiber Optic servo control (4X faster internal communication speed)
  • Submerged Machining to 12.2" Deep
  • Automatic Fluid Level Control
  • Automatic Vertical Machine Tank Door
  • One Piece Hardened 4-Sided Stainless Work Table
  • Fine Grain "Dianite" Casting Material
  • Fixed Table Traveling Column Construction (Column Moves in X & Y)
  • Windows XP Operating System
  • PM5 Power Master Control Improves Poor Flush Machining up to 50%
  • Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
  • DC-Servo (Closed Loop) Torque Control Wire Tensioning System
  • Non-contact, Zero Back-Lash Linear Shaft Motor Drive System (XYUV Axes)
  • Linear Motion Guide Ways
  • All-Axes Absolute Control System
  • Linear Glass Scale Feedback (X-Y-U-V Axes)
  • Optical Rotary Encoder Feedback (Z-Axis)
  • AT Unit With Scrap Wire Processor (Chopper)
  • New 14" AT Annealing Length Improves Threading Reliability
  • Inverter Controlled 16-Step Programmable Flushing
  • Full Time AEII (Anti-Electrolysis) Power Supply Protection
  • Dielectric Fluid Chiller Standard
  • Full 2-yr. Warranty with Triple Diamond Partnership Program
  • Auto-Oiler Lubrication System