PB 5252 – HORIZONTAL BILLET SAW

Horizontal Billet Saw PB 5252 - Heavy-duty dual post, horizontal, metal cutting band saw with 20 H.P. and 3" blade. Capacity 52” x 52”


PRODUCT DESCRIPTION

  • Capacity:  52” x 52”rectangular, 52”  Round, 22 1/2” Min. Clamp Width 
  • Blade:  3" x  40’4’” x  .063” 
  • Blade Tension:  Hydraulically controlled tension (40,000 psi) provides consistent square cutting accuracy. The Motion Detector will shut the machine off should a blade break or stall. 
  • Speed Range:  50-230 SPFM (15-70m/min.) infinitely variable through a frequency inverter system and a heavy duty Worm Gear Transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An Electric Tachometer assures accurate speed settings. 
  • Hydraulic Down Feed:  Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the best setting for the type of material being cut. 
  • Hydraulic Shuttle Table:  The 50” (1270 mm) x 85 1/2” (2175 mm) has five, 4” diameter rollers in front of the blade and four rollers behind that move the material to and from the saw. The entire table assembly rides on steel ways. The shuttle table work height is 27” and has a 23 1/2” stroke. 
  • Motors:  
  • Blade Drive: 20 H.P. (11.25kW). 
  • Hydraulic Pump Motor: 5 H.P. (3.75 kW). 
  • Coolant Pump Motor: 1/4 H.P. (.1875kW).
  • Blade Guides:  A combination of roller bearing and hydraulic actuated carbide blade guides assures the blade is held taut for fast, accurate cuts. The cast iron guide arms are positioned manually. The cast iron Movable Guide Arm is positioned through an Electric Motor, than is Hydraulically Locked in position.
  • Chip Brush:  Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance. 
  • Height Selector:  To reduce the machine’s cycle time, the upward return of the saw frame can be limited through a variable height selector and can be set from 0-52”. 
  • Stabilizer bar:  To reduce blade vibration upon entry into the work piece, a blade stabilizer bar is provided and aids in producing straighter cuts and helps to extend blade life by reducing blade vibration.  
  • Cut Indicator Light:  The cut line indicator light is positioned on the dovetail above the blade and casts a shadow indicating the true cut line which aids in set-up and assures first cut accuracy. 
  • Vise Jaws:  Two sets of vise jaws assure that even the largest piece of material will be held securely. The work piece is held on both sides of the blade, reducing cutting vibration which provides better blade life. Each vise can provide up to 5000 lbs. of clamping force. 
  • Weight Capacity:  The machine’s weight capacity is 40,000 lbs. allowing cutting of solids and billets to the machine’s maximum capacity.

Other Standard Features: 

  • 52” Diameter Blade Wheels
  • Fixed Position Operator Controls
  • Automatic Saw Frame Return
  • Large Single Column w/Outboard Guide Post
  • Out of Square Protection
  • Coolant Flush Hose
  • One Parts and Operational Manual
  • One Saw Blade 
  • Weight of crated Machine…………………………………………………………………………………….……35,200 lbs.
  • Hydraulic capacity………………………………………………………………………………………………...…....35 gals.
  • Coolant capacity…………………………………………………………………………………………………......…48 gals.
  • Table Height…………………………………………………………………………………………………………..27 inches

SPECIFICATIONS

Capacity 52” x 52” rectangular
Capacity 52”  round
Blade Size 3" x  40’4’” x  .063”
Blade Tension 40,000 PSI
 Speed Range 50-230 SPFM (15-70m/min.)
 Blade Drive 20 H.P. (11.25kW)
 Hydraulic Pump  5 H.P. (3.75 kW)
 Coolant Pump  1/4 H.P. (.1875kW)
 Weight Capacity 40,000 lbs
 Weight of Machine 35,200 lbs