Horizontal Mitering Saw PB 2743S - Heavy duty dual post, two way swiveling horizontal, metal cutting band saw with 10 H.P. 2" blade, and up to 60 degree mitering. Capacity 27.5” x 43”


  • 90 DEGREES;          27.5” x 43” ( 700 x  1100mm)                  28” Round (715mm),
  • 45 DEGREES;         26.75” x 27.5”  (680 x 700mm)                26.75” Round (680mm)
  • 60 DEGREES;         18.875” x 27.5” (480x700mm)                  18.875” Round (480mm)
  • Blade:  2” x 31’ 6” x .063” (54 x 9600 x 1.6mm)
  • Saw Frame:  The saw frame is canted at a 8 degree angle for faster cutting of structural and other flat materials. The saw base is Swivels to 45 Degrees one direction and 60 Degrees the other, for miter cutting. A ½ hp (400 W.) motor turns the machine base and the degree of angle is read out on a LED DISPLAY.  The Heavy Duty Saw Frame rides up and down a Linear Way Guide System.
  • Blade Tension:  Hydraulically controlled tension (35,000 psi) provides consistent square cutting accuracy. The Motion Detector will shut the machine off should a blade break or stall.  Blade Wheel Diameter is 34.625” to provide maximum blade life.
  • Speed Range:  50-325 SPFM (15-100m/min.) infinitely variable through a frequency inverter system and a heavy duty Worm Gear Transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An Electric Tachometer assures accurate speed settings.
  • Hydraulic Down Feed:  Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color coded dial allowing the operator to select the best setting for the type of material being cut.
  • Motors:  
  • Blade Drive: 10 H.P. (7.5 kW).
  • Hydraulic Pump Motor: 3 H.P. (2.2 kW).
  • Oil Mist Coolant System: 1/4 HP, (180W)
  • Wire Brush Motor: 1/8 HP (90W),
  • Table Rotation: 1/2 HP, (400W)
  • Blade Guides:  A combination of roller bearing and hydraulically actuated carbide blade guides assures the blade is held taut for fast, accurate cuts.. The cast iron Movable Guide Arm is positioned through a Hydraulic Cylinder, then is Hydraulically Locked in position.
  • Chip Brush: An Independent Motor drives the Blade Brush to assure complete removal of chips from each gullet of the blade assuring optimum cutting performance and enhanced blade life.
  • Fast Approach:  Work height is automatically set allowing the head to raise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance. 
  • Vise Jaws:  Full Stroking Vise Jaws and a Vertical Clamp Devise assure the work piece is secure and eliminating  excessive vibration during the cut providing better blade life and cleaner cuts.  Minimum Clamping Capacity is     16.125” (410mm).
  • Controls: An Independent Electric Cabinet and Control Panel allow the operator to position the controls for optimum viewing of the cutting area.  A PLC controls all electrical and hydraulic functions.
  • Machine Floor Space: 88 ½” H x 165 3/8” W x 74 5/8” D  (2250Hx 4200Wx 1900Dmm)
  • Machine Wt.: 17,600 lbs (8000kg)

Other Standard Features:

  • Miter Cutting 45-0-60
  • 34 5/8" Diameter Blade Wheels
  • Automatic Saw Frame Return
  • Laser cut line indicator
  • Independent Electrical Cabinet and Operator Control
  • Work Light
  • Powered Angle Setting w/LED Display
  • Independent Drive Blade Brush
  • Oil Mist Coolant System
  • Feed Pressure Compensation System
  • Infinitely Variable Blade Speed
  • Vertical Clamping Devise
  • Powered Moveable Guide Arm w/Lock
  • Hydraulically Actuated Carbide Blade Guides
  • Full Stroke Vise Jaws
  • 8 Degree Canted Saw Frame
  • Coolant Flush Hose
  • One Parts and Operational Manual
  • One Saw Blade
  • Hydraulic capacity………………………………………………………….…………………………………….16 gals. (60L)
  • Table Height……………………………………………………………………………………………….…..…37in. (940mm)


Capacity 45° 26.75” x 27.5”  (680 x 700mm)
Capacity 60° 18.875” x 27.5” (480x700mm)
Capacity 90° 27.5” x 43” ( 700 x  1100mm)
Blade Size 2” x 31’ 6” x .063” (54 x 9600 x 1.6mm)
Blade Tension 35,000 PSI
Speed Range 50-325 SPFM (15-100m/min.)
Blade Drive 10 H.P. (7.5 kW)
Hydraulic Pump 3 H.P. (2.2 kW)
Oil Mist Coolant System 1/4 HP, (180W)
Wire Brush Motor 1/8 HP (90W)
Table Rotation 1/2 HP, (400W)
Machine Floor Space 88 ½” H x 165 3/8” W x 74 5/8” D  (2250Hx 4200Wx 1900Dmm)
Machine Weight 17,600 lbs (8000kg)
Table Height 37in. (940mm)


Warranty:   MARVEL MANUFACTURING COMPANY, INC.  warrants to the original user for a period of two (2) years on replacement parts and one (1) year labor.  We warrant from date of factory shipment that every new Spartan Circular Saw is free from defect in material and workmanship.  During that period, we will at our option, repair or replace any part which, upon examination, we find defective.  This warranty will not apply to alterations or modifications made upon Spartan Circular Saws without our written consent or to machines that have been subject to willful abuse.