PA22 EPC - Horizontal Post Style Saw

Horizontal Post Style Saw PA22EPC - Heavy-duty automatic, horizontal, metal cutting band saw with 10 H.P., 2" blade, and programmable control. Capacity 22” x 24.5”


PRODUCT DESCRIPTION

  • Capacity:  22” x 24.5” rectangular (550 mm x 622 mm); 22” (550 mm) round. 4” minimum clamp
  • Blade:  2" x .063” x 21’ 8” (50 x 1.6 x 6,604 mm).
  • Blade Tension:  Hydraulically controlled to (40,000 psi). Includes Motion Detector switch to shut down machine if the blade should stall or break.
  • Speed Range:  60-300 fpm (18-90 m/min.) infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission.  The broad speed range allows for optimum cutting of a large spectrum of materials. Read out at the operator’s touch screen assures accurate speed setting.
  • Feed Force:  Hydraulic feed pressure 0 – 300 lbs. (0 – 1334 N) infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission.  The broad speed range allows for optimum cutting of a large spectrum of materials. Read out at the operator’s touch screen assures accurate speed setting.
  • Hydraulic Bar Feed:  For automatic cutting, shuttle stroke is 16” (400 mm), multi-cycle feature provides for automatic cutting of pieces from 0 to 999”
  • Motors:  
  • Blade Drive: 10 H.P. (11.25kW);
  • Hydraulic Pump: 3 H.P. (2.25kW);
  • Coolant Pump Motor: 0.25 H.P. (.1875kW).
  • EPC Programmable Control: Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to nine jobs. Inputs include part lengths from 0 to 999” (in inches up to 3 decimal places) and number of pieces to be cut.  The blade speed is displayed on and set using the touch screen, but is not stored in memory.  The automatic piece counter stops each job when the pre-set number of cuts has been made.  The control provides the option of running up to 9 jobs consecutively.
  • Out-of-Stock Switch:  The machine will shut off automatically when material is no longer present in the rear vise jaws.

Blade Guides:  Hydraulically controlled solid carbide guides are actuated when the machine’s hydraulic system is started to ensure rigid clamping for accurate cuts. Cast iron guide arms are manually positioned.

  • Automatic Chip Conveyor:  Electric drive auger-type automatic chip conveyor is a standard feature. 
  • Chip Brush:  Powered from the main drive shaft of the saw, cleans chips from blade to improve cutting performance and blade life.
  • Fast Approach:  Work height is automatically set allowing the head to raise just enough to clear the work piece, reducing cycle time.
  • Vise Jaws:  Front vise jaws are split to hold material on both sides of the blade, reducing vibrations and burrs, and reducing remnants to as little as 2 inches (minimum with auto indexing is 6”).
  • Work Light:  Standard feature, mounted directly over work area.
  • Weight Capacity:  The machine’s weight capacity is 17,600 lbs. allowing cutting of solids and billets to the machine’s maximum capacity.
  • Hydraulic Capacity ………………………………………………………………………………………………………………...30 gal.
  • Coolant Capacity…………………………………………………………………………………………………………………...32 gal.
  • Table Height………………………………………………………………………………………………………………………..29.5 in.
  • Crated weight of machine………………………………………………………………………………………………………11,500 lbs.

SPECIFICATIONS

Capacity 22” x 24.5” rectangular (550 mm x 622 mm)
Capacity 22” (550 mm) round
Blade Size 2" x .063” x 21’ 8” (50 x 1.6 x 6,604 mm)
Blade Tension 40,000 PSI
Speed Range 60-300 fpm (18-90 m/min.)
Feed Force 0 – 300 lbs. (0 – 1334 N)
Blade Drive 10 H.P. (11.25kW)
Hydraulic Pump 3 H.P. (2.25kW)
Coolant Pump 0.25 H.P. (.1875kW)
Weight Capacity 17,600 lbs
Machine Weight 11,500 lbs