MV2400-ST

MV2400-ST

MV2400-ST is now capable of submerged cutting up to 16.5 inches deep with full support of the best auto threading system on the market today.  With an annealing length of over 18 inches this system is capable of threading the maximum workpiece height both at the start point and through the gap if needed for a broken wire recovery.  The MV2400-ST features a new, non-contact cylindrical drive system and the M700 series control with a 15-inch touchscreen. With advancements in machine construction and power supply technology, the MV2400-ST is sure to revolutionize EDM machining and increase your shop's productivity.

 

  • Specifications
Machine Tavels: X x Y x Z in (mm) 23.6 x 15.7 x 16.5 (600 x 400 x 425)
Maximum Workpiece Dimensions: W x D x H in (mm) 41.3 x 32.3 x 16.3 (1050 x 820 x 420)
Max. Submerged Workpiece Weight: lb (kg) 3300 (1500)
Table Dimensions: in (mm) 33.0 x 25.2 (840 x 640)
U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm) 15 deg.@ 10.2 (15 deg.@ 260)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4" (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min) 51.2 (1300)
Power Supply V350-V
Minimum Drive Unit / Resolution 0.00001 / 2 millionths (0.0001 / 0.05µm)
User Program Storage [Hard Disk Size] 1GB [20 GB]
Wire Diameter Possible: in (mm) 0.004~0.012 (0.1~0.3)
Minimum Start Hole Diameter: in (mm) 0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg) 22 [44] (10 [20])
Filters / Type 2 / Paper
Filter Tank Capacity: gal (L) 260 (985)
Machine System Dimensions: in (mm) 111.7 x 137.4 (2837 x 3490)
Machine Installed Height: in (mm) 93.7 (2380)
Machine System Weight: lb (kg) 9500 (4300)
Fluid System Weight: lb (kg) 880 (400)
Power Requirements [KVA] 200-230V [13.5] Built in AVR
Compressed Air Requirements 2.7 cu.ft./min. @ 71~100 psi

 

OVERVIEW

  •  New M700 Series Control
  •  15" touch screen
  •  Non-contact Cylindrical Drive Technology

FEATURES

  • V350-V AEII Power Supply DMX-S (Digital Matrix Sensor)
  • Shapes each spark reducing electrode wear
  • World's first Linear Shaft Drive System XY (UV-Z use ball screws)
  • All Fiber Optic servo control (4X faster internal communication speed)
  • Submerged Machining to 16.5" Deep
  • Automatic Fluid Level Control
  • Automatic Vertical Machine Tank Door
  • One Piece Hardened 4-Sided Stainless Work Table
  • Fine Grain "Dianite" Casting Material
  • Fixed Table Traveling Column Construction (Column Moves in X & Y)
  • Windows XP Operating System
  • PM5 Power Master Control Improves Poor Flush Machining up to 50%
  • Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
  • DC-Servo (Closed Loop) Torque Control Wire Tensioning System
  • Non-contact, Zero Back-Lash Linear Shaft Motor Drive System (XY Axes)
  • Linear Motion Guide Ways
  • All-Axes Absolute Control System
  • Linear Glass Scale Feedback (X-Y Axes)
  • Optical Rotary Encoder Feedback (UV-Z-Axis)
  • Scrap Wire Processor (Chopper) (Optional)
  • New 21" AT Annealing Length Improves Threading Reliability
  • Inverter Controlled 16-Step Programmable Flushing
  • Full Time AEII (Anti-Electrolysis) Power Supply Protection
  • Dielectric Fluid Chiller Standard
  • Full 2-yr. Warranty with Triple Diamond Partnership Program
  • Auto-Oiler Lubrication System