MV2400-S ADVANCE

MV2400-S ADVANCE

The MV2400-S is a part of the most innovative and user-friendly wire EDM machine series on the market. The MV2400-S features a new, non-contact cylindrical drive system and the M700 series control with a 15-inch touchscreen. With advancements in machine construction and power supply technology, the MV2400-S is sure to revolutionize EDM machining and increase your shop's productivity. 


 

  • Specifications
  • Machine Tavels: X x Y x Z in (mm) 23.6 x 15.7 x 12.2 (600 x 400 x 310)
    Maximum Workpiece Dimensions: W x D x H in (mm) 41.3 x 32.3 x 12.0 (1050 x 820 x 305)
    Max. Submerged Workpiece Weight: lb (kg) 3307 (1500)
    Table Dimensions: in (mm) 33.0 x 22.0 (840 x 560)
    U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75)
    Taper Angle @ Thickness: in (mm) 15 deg.@ 10.2 (15 deg.@ 260)
    Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4" 60mm (No AT Possible)
    Table Rapid Feed Speed: in/min (mm/min) 51.2 (1300)
    Power Supply V350-V
    Minimum Drive Unit / Resolution 0.000002 / 2 µin ( 0.00005 / 50nm)
    User Program Storage [Hard Disk Size] 1 GB [20 GB]
    Wire Diameter Possible: in (mm) 0.004~0.012 (0.1~0.3)
    Minimum Start Hole Diameter: in (mm) 0.02 (0.5)
    Max. Wire Spool size STD [optional]: lb (kg) 22 [44] (10 [20])
    Filters / Type 2 / Paper
    Filter Tank Capacity: gal (L) 227 (860)
    Machine System Dimensions: in (mm) 105.8 x 119.3 (2687 x 3030)
    Machine Installed Height: in (mm) 84.6 (2150)
    Machine System Weight: lb (kg) 7716 (3500)
    Fluid System Weight: lb (kg) 711 (350)
    Power Requirements [KVA] 200-230V [13.5] Built in AVR
    Compressed Air Requirements 2.7 cu.ft./min. @ 71~100 psi
  •  

     

     

     

     

     

     

    OVERVIEW

    • New M700 Series Control
    • 15" touch screen
    • Non-contact Cylindrical Drive Technology

    FEATURES

    • V350-V AEII Power Supply DMX-S (Digital Matrix Sensor)
    • Shapes each spark reducing electrode wear
    • World's first Linear Shaft Drive System XY ( UV-Z use ball screws)
    • All Fiber Optic servo control (4X faster internal communication speed)
    • Submerged Machining to 12.2" Deep
    • Automatic Fluid Level Control
    • Automatic Vertical Machine Tank Door
    • Three Piece Hardened 3-Sided Stainless Work Table
    • Fine Grain "Dianite" Casting Material
    • Fixed Table Traveling Column Construction (Column Moves in X & Y)
    • Windows XP Operating System
    • PM5 Power Master Control Improves Poor Flush Machining up to 50%
    • Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
    • DC-Servo (Closed Loop) Torque Control Wire Tensioning System
    • Non-contact, Zero Back-Lash Linear Shaft Motor Drive System (XY Axes)
    • Linear Motion Guide Ways
    • All-Axes Absolute Control System
    • Linear Glass Scale Feedback (X-Y Axes)
    • Optical Rotary Encoder Feedback (UV-Z-Axis)
    • Scrap Wire Processor (Chopper) (Optional)
    • New 14" AT Annealing Length Improves Threading Reliability
    • Inverter Controlled 16-Step Programmable Flushing
    • Full Time AEII (Anti-Electrolysis) Power Supply Protection
    • Dielectric Fluid Chiller Standard
    • Full 2-yr. Warranty with Triple Diamond Partnership Program
    • Auto-Oiler Lubrication System