MV1200-R ADVANCE PLUS

MV1200-R ADVANCE PLUS

Introducing the MV1200-R Advance Plus. The new machine features the M700 series control with a 15-inch touchscreen for easier user interface. Mitsubishi is dedicated to constant innovation and strives to build only the highest quality machines. The MV series features new improvements in machine construction, auto-threading, internal machine communication, power supply technology and operating costs. The MV1200-R also includes a new, non-contact Cylindrical Drive System. The machine's improved features are sure to advance your EDM machining. 

  • Specifications

Machine Tavels: X x Y x Z in (mm) 15.7 x 11.8 x 8.7 (400 x 300 x 220)
Maximum Workpiece Dimensions: W x D x H in (mm) 31.9 x 27.6 x 8.5 (810 x 700 x 215)
Max. Submerged Workpiece Weight: lb (kg) 1102 (500)
Table Dimensions: in (mm) 25.2 x 21.3 (640 x 540)
U/V Travels (from center): in (mm) ±2.4 x ±2.4 (±60 x ±60)
Taper Angle @ Thickness: in (mm) 15 deg.@ 8.0 (15 deg.@ 200)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 1.8" 45mm (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min) 51.2 (1300)
Power Supply V350-V
Minimum Drive Unit / Resolution 0.000002 / 2 µin ( 0.00005 / 50nm)
User Program Storage [Hard Disk Size] 1 GB [20 GB]
Wire Diameter Possible: in (mm) 0.004~0.012 (0.1~0.3)
Minimum Start Hole Diameter: in (mm) 0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg) 22 [44] (10 [20])
Filters / Type 2 / Paper
Filter Tank Capacity: gal (L) 145 (550)
Machine System Dimensions: in (mm) 79.7 x 106.4 (2025 x 2702)
Machine Installed Height: in (mm) 79.3 (2015)
Machine System Weight: lb (kg) 5952 (2700)
Fluid System Weight: lb (kg) Included with machine
Power Requirements [KVA] 200-230V [13.5] Built in AVR
Compressed Air Requirements 2.7 cu.ft./min. @ 71~100 psi

 

OVERVIEW

  • New M700 Series Control
  • 15" touch screen
  • Non-contact Cylindrical Drive Technology

 

FEATURES

  • V350-V AEII Power Supply  
  • DMX-S (Digital Matrix Sensor) Shapes each spark reducing electrode wear   
  • World's first Linear Shaft Drive System XYUV (no ball screws)   
  • All Fiber Optic servo control (4X faster internal communication speed)  
  • Submerged Machining to 8.7" Deep
  • Automatic Fluid Level Control
  • Manual Vertical Machine Tank Door
  • One Piece Hardened 4-Sided Stainless Work Table
  • Fine Grain "Dianite" Casting Material
  • Split Axis Construction (Table Moves in X, Column Moves in Y)
  • Windows XP Operating System
  • PM5 Power Master Control Improves Poor Flush Machining up to 50%
  • Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
  • DC-Servo (Closed Loop) Torque Control Wire Tensioning System
  • Non-contact, Zero Back-Lash Linear Shaft Motor Drive System (XYUV Axes)
  • Linear Motion Guide Ways
  • All-Axes Absolute Control System
  • Linear Glass Scale Feedback (X-Y-U-V Axes)
  • Optical Rotary Encoder Feedback (Z-Axis)
  • Auto-Threading with Scrap Wire Processor (Chopper)
  • New 14" AT Annealing Length Improves Threading Reliability
  • Inverter Controlled 16-Step Programmable Flushing
  • Full Time AEII (Anti-Electrolysis) Power Supply Protection
  • Dielectric Fluid Chiller Standard
  • Full 2-yr. Warranty with Triple Diamond Partnership Program
  • Auto-Oiler Lubrication System