MD+PRO III

MD+PRO III

Take your medical manufacturing business to new levels with Mitsubishi EDM and the MD+PRO III. The MD+PRO III Advance features improved machine construction, auto-threading, internal machine communication, power supply technology and operating cost reduction. The machine exemplifies Mitsubishi EDM’s continued dedication to high precision and innovative technology with the new non-contact Cylindrical Drive System on the X & Y axis drives. The MD+PRO III Advance houses the new M700 series control with a 15-inch touchscreen—providing easier user interface than previous models. With new features that will advance EDM machining, the MD+PRO III is truly a revolution in wire EDM technology.

MD+PRO III

 
 
 
 
 
 
 
 
 


 
 
 
 
 
 
 
 
 
  • Specifications

Machine Tavels: X x Y x Z in (mm) 15.7 x 11.8 x 8.7 (400 x 300 x 220)
Maximum Workpiece Dimensions: W x D x H in (mm) 31.9 x 27.6 x 8.5 (810 x 700 x 215)
Max. Submerged Workpiece Weight: lb (kg) 1102 (500)
Table Dimensions: in (mm) 25.2 x 17.7 (640 x 450)
U/V Travels (from center): in (mm) ±2.4 x ±2.4 (±60 x ±60)
Taper Angle @ Thickness: in (mm) 15 deg.@ 8.0 (15 deg.@ 200)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 1.8" 45mm (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min) 51.2 (1300)
Power Supply V350-V
Minimum Drive Unit / Resolution 0.000002 / 2 µin ( 0.00005 / 50nm)
User Program Storage [Hard Disk Size] 1 GB [20 GB]
Wire Diameter Possible: in (mm) 0.004~0.012 (0.1~0.3)
Minimum Start Hole Diameter: in (mm) 0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg) 22 [44] (10 [20])
Filters / Type 2 / Paper
Filter Tank Capacity: gal (L) 145 (550)
Machine System Dimensions: in (mm) 79.7 x 106.4 (2025 x 2702)
Machine Installed Height: in (mm) 79.3 (2015)
Machine System Weight: lb (kg) 5952 (2700)
Fluid System Weight: lb (kg) Included with machine
Power Requirements [KVA] 200-230V [13.5] Built in AVR
Compressed Air Requirements 2.7 cu.ft./min. @ 71~100 psi
 
 OVERVIEW
  • New M700 Series Control
  • 15" touch screen
  • All-Axes Absolute Control System 

FEATURES

  • V350-V AEII Power Supply
  • DMX-S (Digital Matrix Sensor) Shapes each spark reducing electrode wear
  • World's first Linear Shaft Drive System XY (UV-Z use ball screws)
  • All Fiber Optic servo control (4X faster internal communication speed)
  • Submerged Machining to 8.7" Deep
  • Automatic Fluid Level Control
  • Manual Vertical Machine Tank door
  • Three Piece Hardened 3-Sided Stainless Work Table
  • Fine Grain "Dianite" Casting Material
  • Split Axis Construction (Table Moves in X, Column Moves in Y)
  • Windows XP Operating System
  • PM5 Power Master Control Improves Poor Flush Machining up to 50%
  • Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
  • DC-Servo (Closed Loop) Torque Control Wire Tensioning System
  • Non-contact, Zero Back-Lash Linear Shaft Motor Drive System (XY)
  • Linear Motion Guide Ways
  • All-Axes Absolute Control System
  • Linear Glass Scale Feedback (X-Y- Axes)
  • Optical Rotary Encoder Feedback (UV-Z-Axis)
  • Scrap Wire Processor (Chopper) (Optional)
  • New 14" AT Annealing Length Improves Threading Reliability
  • Inverter Controlled 16-Step Programmable Flushing
  • Full Time AEII (Anti-Electrolysis) Power Supply Protection
  • Dielectric Fluid Chiller Standard
  • Full 1-yr. Warranty with Triple Diamond Partnership Program
  • Auto-Oiler Lubrication System