8-MARK-II – VERTICAL TILT-FRAME BAND SAW

Vertical Tilt-Frame Band Saw 8-Mark-II - All-mechanical, universal, metal cutting, band saw machine capable of making any conceivable straight or miter cut (45° right and left). Capacity 18" x 22"

PRODUCT DESCRIPTION

Capacity: 
  • 90°:  18” (457 mm) Horizontal, 22” (560 mm) Vertical.
  • 45°:  18” (457 mm) Horizontal, 12.75” (324 mm) Vertical.
  • Speed Range:  50 – 450 fpm (15 – 137 m/min) infinitely variable speed drive system.
  • Front-Mounted Speed Control:  Allows blade speed to be adjusted from operator’s control station.
  • Feed Range:  0 – 140 lbs. (64 kgf) infinitely variable direct reading scale balance beam.
  • T-Slotted Work Table:  Work area 24.25” x 33” (616 mm x 838 mm); table height 34.5” (876 mm); four machined T-slots accept .625” (15.5 mm) T-Bolts.
  • Miter Cutting:  Column and blade tilt up to 45° right and left of vertical; work always stationary.  Built-in protractor.
  • Quick-Action Vise:  Maximum opening 20” (508 mm).  Jaws can be shifted to either right or left side of blade. Jaws are 6” (152 mm) high, 12” (305 mm) wide.
  • Automatic Stops:  Adjustable stops can be pre-set to stop advance and return of blade and to stop motor at any location within the 18” (457 mm) travel of the blade.
  • Coolant System:  Built in with Flood system, available with added optional drop lubrication system. (Requires compressed air connection - Option Codes ML1 & ML2). Controlled by on-off selector switch at operator’s station. Tank capacity 21 gallons (79 liters).
  • Flushing Hose:   Washes chips from hard-to-get-at places reducing clean-up time.
  • Power Chip Brush:  Together with blade wipers and flood coolant keep blade teeth free of chips.
  • Blade:  14' 6" (4420 mm) long x 1" (25 mm) wide, .035" (89 mm) thick.  One Welded-Edge Band Blade is furnished with each machine.
  • Motors:
  • Main: 2 H.P. (1.5 kW), 1800 RPM, totally enclosed fan cooled.
  • Coolant Pump: 1/8 H.P. (.1 kW) 3600 RPM totally enclosed, built in integrally. Available voltage: 208 volt, 240 volt, 480 volt or 575 volt, 3 phase, 60 Hz. Specific voltage must be specified when ordering. (Optional 50 Hz Modification M15).
 
  • Controls:  IEC fused disconnect switch and magnetic motor starters, with overload and low-voltage protection. Transformer provides low voltage control (120 volts) to all push buttons at operator’s control panel and machine lighting circuits.  Control apparatus mounted in moisture-proof NEMA 12 compartment. Electrical equipment conforms to National Electrical Code NFPA 79.  The Electrical Control Panel is U.L. labeled.

SPECIFICATIONS

Capacity 90° 18” (457 mm) Horizontal 22” (560 mm) Vertical
Capacity 45° 18” (457 mm) Horizontal 12.75” (324 mm) Vertical
Table Height 34.5” (876 mm)
Quick-Action Vise Maximum opening 20” (508 mm)
Tank Capacity 21 gallons(79 liters)
Motors Main: 2 H.P. (1.5 kW), 1800 RPM Coolant Pump: 1/8 H.P. (.1 kW) 3600 RPM
Speed Range 50 – 450 fpm (15 – 137 m/min)
Feed Range 0 – 140 lbs. (64 kgf)
Work Area 24.25” x 33” (616 mm x 838 mm)
Jaws 6” (152 mm) high 12” (305 mm) wide
No Tool Blade Change Yes
Blade 14' 6" (4420 mm) long 1" (25 mm) wide .035" (89 mm) thick

MORE INFO

  • 8-Mark-II Brochure
  • 8-Mark-II Floor Layout
  • 8-Mark-II Installation Video
  • Warranty:  Marvel Manufacturing Company, Inc. warrants to the original user for a period of (2) years on parts and labor from the date of factory shipment, that every new MARVEL metal sawing machine is free from defect in material and workmanship. During that period, we will, at our option, repair or replace any part which, upon examination, we find defective.   This warranty will not apply to alterations or modifications made upon MARVEL metal sawing machines without our written consent, or to machines which have been subject to willful abuse.